Skip to main content

Nautiplus

By
 

NAUTIPLUS

Polyester fabric, PVC-coated on both sides and engraved on one side, specially designed for all marine covers, hoods and Biminis.

Product Features
Nautiplus

sun-iconSun Protection
Fade Resistant

sun-iconWaterproof
Mildew Resistant

sun-iconPrintable
Wide Variety of Colors

Nautiplus canvas is a fabric made of high tenacity polyester, PVC-coated on both sides and engraved on one side.

Nautiplus is a 100% waterproof fabric with excellent dimensional stability and weldable under normal atmospheric conditions.

Nautiplus is specially designed for all marine exterior covers, hoods, Biminis and winter covers.

PVC Technical characteristics

PVC is a high-strength material, economic and recyclable, with low thermal conductivity. That’s why PVC canvases have become a widely used material in many different industries. PVC tarps are used in textile architecture, truck covers, covers for pools or ponds, awnings and in all other applications requiring waterproofing, high tensile resistance and durability.

Technological advances in fabric development allow PVC fabrics to have high strength and flexibility, but with a weight-to-surface ratio lower than other materials.

RECASENS PVC Technical fabrics are tested and proven products — both the mechanical properties and the color are highly resistant to weather, decay and fading.

RECASENS PVC canvases have excellent weldability and are easily printable.

Applications

Properties

Nautiplus Warranty

For 5 years after installation, RECASENS warranty covers their fabrics against decomposition and fading only, for regularly maintained fabrics under normal use and environmental conditions.

RECASENS will either, at its discretion, replace free of charge or reimburse the invoice value of the section of fabric recognized as faulty, excluding any costs or any other compensation for any reason whatsoever.

The warranty does not protect against any damage due to abuse, neglect, vandalism, burns of any kind, fires and natural disasters.

Consequently, the warranty excludes the following damages:

  • Faulty maintenance or the use of unsuitable products or instruments: no detergent, chemical product or solvent can be used, NOR any scraper or other instrument that may damage the surface.
  • Defects due to the aging and normal wear of the fabric.
  • Atmospheric or phytosanitary pollution.
  • Soiling caused by animals.
  • The repair of damage or defects in the fabric resulting from accidents or negligence not attributable to RECASENS or resulting from force majeure.
  • Faulty assembly or handling by the user, the projection of various products, hanging objects on the fabric, falling objects, bumps, road accidents, vandalism, burns from cigarettes or other sources, and fire.
  • Lightning or unusual climatic or environmental conditions.

The warranty excludes the cost of any mechanical device (hardware, mechanisms, structures, etc.) as well as any cost of manufacturing, assembly and installation.

The warranty takes effect from the date of installation of tops, covers or any other product made with RECASENS canvases.

RECASENS canvases are a component of the final product. If you detect any defective fabric, please contact the installer or distributor from whom you purchased the product.

Maintenance of PVC Fabrics

RECASENS fabrics are easy to maintain. The fabric surface is non-porous plastic, making it difficult for dirt to adhere to it, and easy to remove any dirt that does accumulate.

Dirt accumulation can damage the PVC canvas finish, causing accelerated deterioration. It is recommended to periodically clean the canvas to prevent decay and mold growth.

For effective cleaning, sponge off the fabric using soapy water and then rinse with clean water. Let the fabric dry fully tensioned.

We recommend using neutral (non-ionic) and a low percentage alcohol detergent. Avoid using highly acidic or highly alkaline detergents and do not use solvents or bleaching agents such as bleach or hydrogen peroxide.

To avoid damaging the canvas finish, do not use chemicals or abrasive brushes or cleaning systems using water jets at high pressure.

Technical features and Catalogs

Certificates

5 Años

Recacril® Marine

By
 

Recacril® Marine

Fabrics with exceptional resistance to salt water environments, made from solution-dyed acrylic fibers, designed for use on boats.

Product Features
Recacril® Marine

sun-iconSun Protection
Fade Resistant

sun-iconDecay Proof
Mold & Mildew Resistant

sun-iconPrintable
Wide variety of colors

Recacril® Marine fabrics are designed for use in boats (hoods, Biminis, flybridges,etc).

Like Recacril® fabrics, Recacril® Marine fabrics are made from solution-dyed acrylic fibers, which gives them an exceptional color resistance to high salinity conditions such as the marine environment.

Infinity Finishing Process

Recacril® Marine fabrics go through the enhanced Infinity Process for improved waterproofing.

The enhanced Infinity Process provides Recacril® Marine fabrics with a softer and more ductile touch than standard fabrics, making them better adapted to the complex shapes of nautical structures.

Applications

Properties

Recacril® Marine Warranty

For 10 years after installation, RECASENS warranty covers their fabrics against decomposition and fading only, for regularly maintained fabrics under normal use and environmental conditions.

RECASENS will either, at its discretion, replace free of charge or reimburse the invoice value of the section of fabric recognized as faulty, excluding any costs or any other compensation for any reason whatsoever.

The warranty does not protect against any damage due to abuse, neglect, vandalism, burns of any kind, fires and natural disasters.

Consequently, the warranty excludes the following damages:

  • Faulty maintenance or the use of unsuitable products or instruments: no detergent, chemical product or solvent can be used, NOR any scraper or other instrument that may damage the surface of the fibers.
  • Defects due to the aging and normal wear of the fabric.
  • Atmospheric or phytosanitary pollution.
  • Soiling caused by animals.
  • The repair of damage or defects in the fabric resulting from accidents or acts of nature.
  • Faulty assembly or handling by the user, the projection of various products, hanging objects on the fabric, falling objects, bumps, road accidents, vandalism, burns from cigarettes or other sources, and fire.
  • Lightning or unusual climatic or environmental conditions.

The warranty excludes the cost of any mechanical device (hardware, mechanisms, structures, etc.) as well as any cost of manufacturing, assembly and installation.

The warranty takes effect from the date of installation of marine covers, Biminis, or any other product made with RECASENS canvases.

The RECASENS canvases are a component of the final product. If you detect any defective fabric, please contact the installer or distributor from whom you purchased the product.

Maintenance for Recacril® Marine Canvases

The high-tech Infinity Process finishing technique provides RECASENS canvases with long lasting protection against mold, as well as excellent water and oil repellency, making marine tops and covers that will protect you from both sun and water for many years.

However, the accumulation of dust, air pollution particles, foreign organic materials and general dirt can damage this protection, shortening the life of the canvas, so the fabric must be properly cleaned and maintained.

The most effective method for maintaining your canvas is to clean it once a month using a low pressure hose to prevent dirt accumulation. IMPORTANT: The fabric must be completely dry before closing or storing it.

The fabric may be left open in the rain, as rain will also help prevent the accumulation of dirt. If for any reason you have to store the canvas while it is still wet, open it as soon as possible to let it dry.

In addition to monthly rinsing, in most environments, the canvas will require a more thorough cleaning every 2-3 years. To clean your canvas:

  1. Brush off excess dust and dirt with a soft brush. NEVER brush with stiff brushes as that will damage the surface finish on the fibers.
  2. Spray the fabric with clean water. Do not use a high pressure hose. Use only low pressure hoses to clean the fabric.
  3. Prepare a solution of solvent-free soap in warm water (no more than 40ºC), and apply it to dissolve any dirt or debris accumulated on the surface of the fibers.
  4. Rinse thoroughly with water to remove all traces of soap.
  5. Let the canvas air dry fully tensioned, protected from the wind, until completely dry.

Recacril® Marine tarps are protected against the growth of fungi, however, fungi can grow on embedded dirt. A more intensive cleaning will remove these types of stains:

  1. Brush off excess dust and dirt with a soft brush. NEVER brush with stiff brushes as that will damage the surface of the fabric fibers.
  2. Prepare a solution of 10% household bleach, 20% of solvent-free neutral detergent and 70% water.
  3. Apply the solution to the fabric, and leave it on for 15-20 minutes maximum.
  4. Rinse with clean water several times, as residual bleach could damage the fabric.
  5. Let the canvas air dry fully tensioned, protected from the wind, until completely dry.
  6. Repeat the process if necessary.

Properly dispose of chemicals and dirty water to protect the environment. Bleach and other chemicals can damage or destroy surrounding plants, animals and other living matter.

Consumer information

RECASENS fabrics, Technical Textiles, are fabrics easy to maintain. The fabric surface is non-porous plastic, making it difficult for dirt to adhere but easy to remove.

Dirt accumulation can end up damaging the PVC canvas finish, causing accelerated deterioration. It is recommended to periodically clean the canvas to prevent rot and mold growth.

For effective cleaning, sponge out using soapy water and then rinse with clean water. Let dry the fabric positioned in a perfect tension.

We recommend using neutral (non-ionic) and a low percentage of alcohol detergents. Avoid using highly acidic or highly alkaline detergents and do not use solvents or bleaching agents such as bleach or hydrogen peroxide.

To avoid damaging the canvas finish, do not use chemicals or abrasive brushes or cleaning systems using water jets at high pressure.

Technical features and Catalogs

Certificates

Recwater

By
 

Recwater

Solution-dyed acrylic fabric with a PVC-coated side. Its waterproofing performance makes it ideal for use in boats.

Product Features
Recwater

sun-iconSun Protection
Fade Resistant

sun-iconWaterproof
Mildew Resistant

sun-iconPrintable
Wide Variety of Colors

The Recwater canvases are made of solution-dyed acrylic fibers with PVC coating on one side, which makes it absolutely waterproof. The PVC coating is colored to match the color of the acrylic, making it possible to combine the elegance of the acrylic fabric with PVC’s waterproof performance.

The PVC coating is formulated to achieve perfect adhesion with the acrylic fabric. Unlike other products on the market, Recwater does not crack or roll and has excellent dimensional stability.

The PVC-free face is treated to achieve good water and oil repellency, while the coated side is engraved with a design that gives the PVC a fabric appearance.

Being a heavier product and more resistant than Recacril®, makes Recwater particularly suitable for boats that frequent areas with extreme weather conditions.

It is also suitable for awnings in rainy climates. If being used in an awning, the weight of the article should be taken into consideration when choosing hardware.

The Recwater canvases follow a rigorous quality control throughout the manufacturing process, meeting all requirements for obtaining approval of the UNE-EN 13561:2004+A1:2009 (performance requirements including awnings security).

Antimicrobial Treatment

Decay-causing microorganisms, such as molds, algae and bacteria can damage acrylic coated canvases. To guard against these microorganisms and ensure the quality of our fabrics, Recwater canvases are treated with antimicrobial products that offer optimal protection.

Antimicrobial products prevent microorganisms adhering to the fabric, however, these microorganisms may grow on dirt and other foreign substances if left on the fabric.
To maximize the lifetime of the Recwater canvas, it is essential to carry out periodic cleaning as described in the Maintenance Section.

Applications

Properties

Recwater Warranty

For 5 years after installation, RECASENS warranty covers their fabrics against decomposition and fading only, for regularly maintained fabrics under normal use and environmental conditions.

RECASENS will either, at its discretion, replace free of charge or reimburse the invoice value of the section of fabric recognized as faulty, excluding any costs or any other compensation for any reason whatsoever.

The warranty does not protect against any damage due to abuse, neglect, vandalism, burns of any kind, fires and natural disasters.

Consequently, the warranty excludes the following damages:

  • Faulty maintenance or the use of unsuitable products or instruments: no detergent, chemical product or solvent can be used, NOR any scraper or other instrument that may damage the surface of the fibers.
  • Defects due to the aging and normal wear of the fabric.
  • Atmospheric or phytosanitary pollution.
  • Soiling caused by animals.
  • The repair of damage or defects in the fabric resulting from accidents or acts of nature.
  • Faulty assembly or handling by the user, the projection of various products, hanging objects on the fabric, falling objects, bumps, road accidents, vandalism, burns from cigarettes or other sources, fire.
  • Lightning or unusual climatic or environmental conditions.

The warranty excludes the cost of any mechanical device (hardware, mechanisms, structures, etc.) as well as any cost of manufacturing, assembly and installation.

The warranty takes effect from the date of installation of fixed-frame awnings, boat tops or any other product made with RECASENS canvases.

The RECASENS canvases are a component of the final product. If you detect any defective fabric, please contact the installer or distributor from whom you purchased the product.

Maintenance for Recwater Canvases

The high-tech Infinity Process finishing technique provides RECASENS canvases with long lasting protection against mold, as well as excellent water and oil repellency, making tops and covers that will protect you from both sun and water for many years.

However, the accumulation of dust, air pollution particles, foreign organic materials and general dirt can damage this protection, shortening the life of the canvas, so the fabric must be properly cleaned and maintained.

The most effective method for maintaining your canvas is to clean it once a month using a low pressure hose to prevent dirt accumulation. IMPORTANT: The fabric must be completely dry before closing or storing it.

The fabric may be left open in the rain, as rain will also help prevent the accumulation of dirt. If for any reason you have to store the canvas while it is still wet, open it as soon as possible to let it dry.

In addition to monthly rinsing, in most environments, the canvas will require a more thorough cleaning every 2-3 years. To clean your canvas:

  1. Brush off excess dust and dirt with a soft brush. NEVER brush with stiff brushes as that will damage the surface finish on the fibers.
  2. Spray the fabric with clean water. Do not use a high pressure hose. Use only low pressure hoses to clean the fabric.
  3. Prepare a solution of solvent-free soap in warm water (no more than 40ºC), and apply it to dissolve any dirt or debris accumulated on the surface of the fibers.
  4. Rinse thoroughly with water to remove all traces of soap.
  5. Let the canvas air dry fully tensioned, protected from the wind, until completely dry.

Recwater tarps are protected against the growth of fungi, however, fungi can grow on embedded dirt. A more intensive cleaning will remove these types of stains:

  1. Brush off excess dust and dirt with a soft brush. NEVER brush with stiff brushes as that will damage the surface finish on the fibers.
  2. Prepare a solution of 10% household bleach, 20% solvent-free neutral detergent and 70% water.
  3. Apply the solution to the fabric, and leave it on for 15-20 minutes maximum.
  4. Rinse with clean water several times, as residual bleach could damage the fabric.
  5. Let the fabric air dry fully tensioned, protected from the wind, until completely dry.
  6. Repeat the process if necessary.

Properly dispose of chemicals and dirty water to protect the environment. Bleach and other chemicals can damage or destroy surrounding plants, animals and other living matter.

Consumer Information

Some imperfections in material may occur due to handling during preparation or installation of the canvas. These small irregularities, such as veining, small folds or whitish streaks are inherent in the nature of acrylic fiber and do not affect the fabric properties. Such defects are inherent in the fabric, and are not the responsibility of the installer or manufacturer.

Whitish marbled streaks may form on the surface of the fabric during the folding, handling and fabrication. This effect, called “crazing,” is caused when folding the fabric causes microfractures to the finish, which causes light to refract off the fabric differently. This effect tends to appear more often in lighter colored fabrics.

Small folds can appear along the seams by rolling the canvas due to increased thickness of the seam compared to the rest of the canvas cover.

Technical features and Catalogs

Certificates

5 Años

Acrylic awning braid

By
 

Acrylic Awning Braid

Herringbone braid ribbon, made from solution-dyed acrylic fibers gives a coordinated appearance and finish to your awnings.

Product Features 
Acrylic Awning Braid 

sun-iconSun Protection
Fade Resistant 

Antimicrobial 
Mold and Mildew Resistant – Weather Resistant

sun-iconPrintable
Wide Variety of Colors

Expanding the range of solutions of the Recacril® canvases, RECASENS presents 2 ribbon options made from solution-dyed acrylic fibers to give a coordinated appearance and finish to your awnings.

Our braid ribbons have a great degree of flexibility, which will lay flat whether sewn in curves or zigzags.

Features braided trim:

  • Composition: 100% solution-dyed acrylic.
  • Width: 23 mm.
  • Full size roll: 100 m.
  • Colors: Recacril® fabric range
  • Presentation: bobbin.
  • Easy to sew.
  • Soft and flexible.
  • Stain and UV-ray resistant.

Acrylic awning braid follows rigorous quality controls throughout the manufacturing process, meeting all requirements for obtaining approval of the UNE-EN 13561:2004+A1:2009 (performance requirements including awnings safety).

Herringbone Trim Features:

  • Composition: 100% solution-dyed.
  • Width: 25 mm.
  • Full size roll: 100 m.
  • Colors: Recacril® fabric range.
  • Presentation: roll.
  • Easy to sew.
  • Soft and flexible.
  • Stain and UV resistant.

Applications

Properties

Acrylic Awning Braid Warranty

For 5 years after installation, RECASENS warranty covers their fabrics against decomposition and fading only, for regularly maintained fabrics under normal use and environmental conditions.

RECASENS will either, at its discretion, replace free of charge or reimburse the invoice value of the section of fabric recognized as faulty, excluding any costs or any other compensation for any reason whatsoever.

The warranty does not protect against any damage due to abuse, neglect, vandalism, burns of any kind, fires and natural disasters.

Consequently, the warranty excludes the following damages:

  • Faulty maintenance or the use of unsuitable products or instruments: no detergent, chemical product or solvent can be used, NOR any scraper or other instrument that may damage the surface of the fibers.
  • Defects due to the aging and normal wear of the fabric.
  • Atmospheric or phytosanitary pollution.
  • Soiling caused by animals.
  • The repair of damage or defects in the fabric resulting from accidents or acts of nature.
  • Faulty assembly or handling by the user, the projection of various products, hanging objects on the fabric, falling objects, bumps, road accidents, vandalism, burns from cigarettes or other sources, and fire.
  • Lightning or unusual climatic or environmental conditions.

The warranty excludes the cost of any mechanical device (hardware, mechanisms, structures, etc.) as well as any cost of manufacturing, assembly and installation.

The warranty takes effect from the date of installation of awnings, curtains or any other product made with RECASENS canvases.

RECASENS canvases are a component of the final product. If you detect any defective fabric, please contact the installer or distributor from whom you purchased the product.

Technical features and Catalogs

Certificates

5 Años

Recsystem® Marine

By
 

Recsystem®

Solution-dyed acrylic fabric, resin-coated for maximum waterproofness, ideal for boat protection.

Product Features
Recsystem® Marine

sun-iconSun Protection
Fade Resistant

sun-iconWater Repellent
Mildew Resistant

sun-iconPrintable
Wide Variety of Colors

Recsystem® Marine fabrics are the natural evolution of Recacril® fabrics, designed to achieve high impermeability with a hydrostatic head rating over 1000 mm. Besides the Infinity Process, these canvases are coated on one side with high-tech resins, providing optimal resistance to water penetration.

The special coating formulation and implementation process also provides Recsystem® Marine fabric with an exceptional resistance to the wrinkling that often occurs during the manufacturing process. Moreover, unlike other products on the market, the coated side of Recsystem® Marine fabrics does not shine or have a whitish appearance.

Recsystem® Marine fabrics are engineered to resist the particular conditions of marine environments.

Recsystem® Marine canvases come in 152 cm widths with a wide range of solid colors ideal for use on boat covers.

The Recsystem® Marine canvases follow a rigorous quality control throughout the manufacturing process, meeting all requirements for obtaining approval of the UNE-EN 13561:2004+A1:2009 (performance requirements including awnings security).

Antimicrobial Treatment

Decay-causing microorganisms such as molds, algae and bacteria can damage acrylic-coated canvases. To guard against these microorganisms and ensure the quality of our fabrics, Recsystem® Marine canvases are treated with antimicrobial products that offer optimal protection.

Antimicrobial products prevent microorganisms adhering to the fabric, however, these microorganisms may grow on dirt and other foreign substances left on the fabric. To maximize the lifetime of Recsystem® Marine canvas, it is essential to carry out periodic cleaning as described in the Maintenance Section.

Applications

Properties

Recsystem® Marine Warranty

For 5 years after installation, RECASENS warranty covers their fabrics against decomposition and fading only, for regularly maintained fabrics under normal use and environment.

RECASENS will either, at its discretion, replace free of charge or reimburse the invoice value of the section of fabric recognized as faulty, excluding any costs or any other compensation for any reason whatsoever.

The warranty does not protect against any damage due to abuse, neglect, vandalism, burns of any kind, fires and natural disasters.

Consequently, the warranty excludes the following damages:

  • Faulty maintenance or the use of unsuitable products or instruments: no detergent, chemical product or solvent can be used, NOR any scraper or other instrument that may damage the surface.
  • Defects due to the aging and normal wear of the fabric.
  • Atmospheric or phytosanitary pollution.
  • Soiling caused by animals.
  • The repair of damage or defects in the fabric resulting from accidents or negligence not attributable to RECASENS or resulting from force majeure.
  • Faulty assembly or handling by the user, the projection of various products, hanging objects on the fabric, falling objects, bumps, road accidents, vandalism, burns from cigarettes or other sources, and fire.
  • Lightning or unusual climatic or environmental conditions.

The warranty excludes the cost of any mechanical device (hardware, mechanisms, structures, etc.) as well as any cost of manufacturing, assembly and installation.

The warranty takes effect from the date of installation of marine products, tops or any other product made with RECASENS canvases.

RECASENS canvases are a component of the final product. If you detect any defective fabric, please contact the installer or distributor from whom you purchased the product.

Maintenance for Recsystem® Marine Canvases

The high-tech Infinity Process finishing technique provides RECASENS canvases with long lasting protection against mold, as well as excellent water and oil repellency, making tops and covers that will protect you from both sun and water for many years.

However, the accumulation of dust, air pollution particles, foreign organic materials and general dirt can damage this protection, shortening the life of the canvas, so the fabric must be properly cleaned and maintained.

The most effective method for maintaining your canvas is to clean it once a month using a low pressure hose to prevent dirt accumulation. IMPORTANT: The fabric must be completely dry before closing or storing it.

The canvas may be left open in the rain, as rain will also help prevent the accumulation of dirt. If for any reason you have to store the fabric while it is still wet, open it as soon as possible to let it dry.

In addition to monthly rinsing, in most environments, the canvas will require a more thorough cleaning every 2-3 years. To clean your canvas:

  1. Brush off excess dust and dirt with a soft brush. NEVER brush with stiff brushes as that will damage the surface finish on the fibers.
  2. Spray the fabric with clean water. Do not use a high pressure hose. Use only low pressure hoses to clean the fabric.
  3. Prepare a solution of solvent-free soap in warm water (no more than 40ºC), and apply it to dissolve any dirt or debris accumulated on the surface of the fibers.
  4. Rinse thoroughly with water to remove all traces of soap.
  5. Let the canvas air dry fully tensioned, protected from the wind, until it is completely dry.

Recsystem® Marine tarps are protected against the growth of fungi, however, fungi can grow on embedded dirt. A more intensive cleaning will remove these types of stains:

  1. Brush off excess dust and dirt with a soft brush. NEVER brush with stiff brushes as that will damage the surface finish on the fibers.
  2. Prepare a solution of 10% household bleach, 20% solvent-free neutral detergent and 70% water.
  3. Apply the solution to the fabric, and leave it on for 15-20 minutes maximum.
  4. Rinse with clean water several times, as residual bleach could damage the fabric.
  5. Let the fabric air dry fully tensioned, protected from the wind, until completely dry.
  6. Repeat the process if necessary.

Properly dispose of chemicals and dirty water to protect the environment. Bleach and other chemicals can damage or destroy surrounding plants, animals and other living matter.

Consumer information

Some imperfections in material may occur due to handling during preparation or installation of the canvas. These small irregularities, such as veining, small folds or whitish streaks are inherent in the nature of acrylic fiber and do not affect the fabric properties. Such defects are inherent in the fabric, and are not the responsibility of the installer or manufacturer.

Whitish marbled streaks may form on the surface of the fabric during the folding, handling and fabrication. This effect, called “crazing,” is caused when folding the fabric causes microfractures to the finish, which causes light to refract off the fabric differently. This effect tends to appear more often in lighter colored fabrics.

Small folds can appear along the seams by rolling the canvas due to increased thickness of the seam compared to the rest of the canvas cover.

Technical features and Catalogs

Certificates

5 Años
1247